Wednesday, December 5, 2007

Dead Guy Clone

Makes 5 gallons

6.6 Lbs. -Coopers Light malt extract syrup
1.0 -lb Coopers Light Dry Malt Extract
1/2 -lb Carastan malt
1 -lb Munich malt (10L)
1.5 -Oz. Perle hops (boil 60 minutes - bittering hop)
1 -Oz. Sterling hops (add at end of boil — aroma hop)
1 -tsp Irish moss for 60 min
¾ -cup of corn sugar for priming.
White Labs WLP001 California Ale yeast

Original Gravity = 1.065
Final Gravity = 1.016
IBU’S = 40
Alcohol 6.2% by volume

Steep crushed malted grain in 2 gallons of 150° water (tap water is about 130°) for 30 minutes. Don’t fret the temp too much, relax. Remove the grain from the hot water with a strainer, then bring water to a boil. When boiling starts, remove pot from burner and add 1 cup malt syrup. Return to a boil, then add 1.5 oz. Perle hops and Irish Moss, and boil for 60 minutes. Add 1 oz. Sterling hops at the end of the boil. Then add remainder of Malt syrup and dry malt extract and stir to mix, wait 10 minutes to sanitize. Fill your sanitized carboy with 2 gallons of cold water. Strain the hot wort into the carboy and top off to the 5 gallon mark. Add yeast when beer is less than 78°, and ferment and bottle as usual.

7 comments:

Brett Begani said...

followed recipe exactly.
1.065 OG

Brett Begani said...

Rack to Secondary

Brett Begani said...

1.020 today, will give it until Saturday to finish out.

Brett Begani said...

1.020 FG

Brett Begani said...

My god it tastes good.

Brett Begani said...

carastan is Crystal 30

Brett Begani said...

All Grain Recipe posted.